Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all 50 states, DC & Puerto Rico

HOA & Apartment Pressure Washing in Your Area

Building washing, sidewalks, breezeways, pools and amenity areas for HOAs, apartments and condos. Typical cost $800-$5,000.

From the free quote to the final rinse, hoa & apartment pressure washing in your area follows a simple process: inspect, protect, clean, rinse and check.

The right method for the job

Soft wash and pressure washCleaning method

Signs you need hoa & apartment pressure washing

  • Mildew on building walls
  • Dirty breezeways and stairs
  • Stained sidewalks and curbs
  • Residents' complaints or HOA violation notices

Why it gets dirty

  • Heavy foot traffic
  • Shade and humidity
  • Shared trash and parking areas

Easy upkeep between cleanings

  • Plan cleaning before inspections or paint cycles
  • Notify residents ahead of time

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Water into units through windows and doors
  • Damaged landscaping
  • Residents' cars and belongings in the spray area

How we handle hoa & apartment pressure washing

  1. Walk the property with the manager
  2. Plan a schedule and notify residents
  3. Wash buildings and breezeways
  4. Clean flatwork and amenity areas
  5. Inspect and report

HOA & Apartment Pressure Washing cost in your area

$800-$5,000Typical range depending on the number of buildings
One day to several weeksTypical time on site
Yearly, with flatwork more oftenRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Serving your area and nearby towns

We provide hoa & apartment pressure washing across all 50 states, Washington, DC and Puerto Rico. Pick your state to see local details:

HOA & Apartment Pressure Washing: frequently asked questions

How much does hoa & apartment pressure washing cost?

HOA & Apartment Pressure Washing typically costs $800-$5,000 depending on the number of buildings, and usually takes One day to several weeks. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for hoa & apartment pressure washing?

HOA & Apartment Pressure Washing is done with soft wash and pressure wash. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.

Is hoa & apartment pressure washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule hoa & apartment pressure washing?

Yearly, with flatwork more often. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Your Area

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Pressure Washing

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface.

Typical $150-$600

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Pool Deck Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote near you. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote