Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all 50 states, DC & Puerto Rico
(555) 010-0000

Paver Cleaning & Sealing for Brick in Your Area

Low-pressure wash for brick. Paver cleaning, re-sanding with polymeric sand and sealing to lock joints, deter weeds and bring back color. Typical cost $600-$1,800.

Call (555) 010-0000Instant quote

Paver Cleaning & Sealing for Brick is one of the jobs we do most often in your area. Typical jobs cost $600-$1,800, and you approve the price before we begin. For brick, that means low-pressure wash.

Method and pressure

Low-pressure washCleaning method
Usually 500-1,500 PSI with a wide fan tip, held well back from the mortarPressure

Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.

What to know about cleaning brick

Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.

Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.

How often: Every 2-3 years for most homes.

When to book paver cleaning & sealing for brick

  • Weeds and moss growing in the joints
  • Joint sand washed out or full of ant hills
  • Faded, dull pavers
  • White haze (efflorescence) on the surface
  • Pavers shifting at the edges

What causes the dirt and stains

  • Rain and washing that remove joint sand over time
  • Shade and organic debris in the joints
  • Salts rising out of the pavers and base
  • UV fading the color

Easy upkeep between cleanings

  • Pull weeds before they root deeply
  • Top up joint sand where it's low
  • Keep downspouts from pouring onto pavers

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Blasting out joint sand and loosening pavers
  • Sealing over efflorescence or damp pavers, which traps a white haze
  • Using the wrong sealer, which can turn cloudy or slippery

Our process for paver cleaning & sealing for brick

  1. Inspect the pavers, joints and edges
  2. Clean the pavers and treat efflorescence if present
  3. Let them dry and refill joints with polymeric sand
  4. Activate the sand and let it set
  5. Apply a paver sealer suited to the look you want

How much does paver cleaning & sealing for brick cost?

$600-$1,800Typical range for about 400-800 sq ft of pavers
1-2 days including dry timeTypical time on site
Clean every 1-2 years, reseal every 2-4 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for brick

Serving your area and nearby towns

We provide paver cleaning & sealing for brick across all 50 states, Washington, DC and Puerto Rico. Pick your state to see local details:

Paver Cleaning & Sealing for Brick: frequently asked questions

How much does paver cleaning & sealing for brick cost?

Paver Cleaning & Sealing for Brick typically costs $600-$1,800 for about 400-800 sq ft of pavers, and usually takes 1-2 days including dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for paver cleaning & sealing for brick?

For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.

Is paver cleaning & sealing for brick safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule paver cleaning & sealing for brick?

Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Your Area

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Pressure Washing

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface.

Typical $150-$600

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Pool Deck Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $200-$500

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

Ready for a cleaner home or business?

Get a free pressure washing quote near you. Tell us what needs cleaning and we'll give you a price and the next available date.

Call (555) 010-0000Book a visit
Call NowFree Quote