Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all 50 states, DC & Puerto Rico
(555) 010-0000

Exterior Mold & Mildew Removal for Pressure-Treated Wood in Your Area

Low-pressure wash for pressure-treated wood. Killing and removing mold, mildew and algae from siding, decks, walkways and fences, with treatment that slows regrowth. Typical cost $250-$700.

Call (555) 010-0000Instant quote

When we handle exterior mold & mildew removal for pressure-treated wood in your area, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. For pressure-treated wood, that means low-pressure wash.

Method and pressure

Low-pressure washCleaning method
Usually 500-1,200 PSI with a wide fan tipPressure

Cleaning solution: An oxygen-based or sodium percarbonate wood cleaner, then an oxalic acid brightener.

Cleaning pressure-treated wood safely

Pressure-treated pine is the most common deck and fence wood. It grays, mildews and gets slippery when wet. A wood cleaner does most of the work, and a brightener afterward restores the wood's color and helps new stain soak in.

Avoid: High pressure and narrow tips, which leave furry, gouged boards and lap marks.

How often: Clean yearly; restain every 2-3 years.

Signs you need exterior mold & mildew removal for pressure-treated wood

  • Black, green or gray spots and film
  • Slippery walkways and decks
  • Musty smell near shaded walls
  • Growth that returns soon after rinsing

Why it gets dirty

  • Shade, humidity and poor air flow
  • Organic debris and pollen
  • Surfaces that stay damp after rain or sprinklers

What you can do yourself

  • Improve sun and air flow by trimming plants
  • Keep gutters and sprinklers from soaking walls
  • Clean small areas with an outdoor mildew cleaner, following the label

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Blasting growth off without killing it, so it grows back fast
  • Mixing cleaning chemicals, which can release toxic gas
  • Damaging plants with runoff

Our process for exterior mold & mildew removal for pressure-treated wood

  1. Identify surfaces and growth
  2. Protect plants and fixtures
  3. Apply a solution that kills the growth
  4. Rinse at low pressure
  5. Post-treat where helpful to slow regrowth

This service is for outdoor surfaces. Mold inside the home, in attics or in wall cavities needs a mold remediation specialist, not a pressure washing company.

Exterior Mold & Mildew Removal for Pressure-Treated Wood cost in your area

$250-$700Typical range for typical exterior growth on a home
2-4 hoursTypical time on site
Every 1-2 years in humid or shaded areasRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pressure-treated wood

Serving your area and nearby towns

We provide exterior mold & mildew removal for pressure-treated wood across all 50 states, Washington, DC and Puerto Rico. Pick your state to see local details:

Exterior Mold & Mildew Removal for Pressure-Treated Wood: frequently asked questions

How much does exterior mold & mildew removal for pressure-treated wood cost?

Exterior Mold & Mildew Removal for Pressure-Treated Wood typically costs $250-$700 for typical exterior growth on a home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for exterior mold & mildew removal for pressure-treated wood?

For pressure-treated wood: usually 500-1,200 PSI with a wide fan tip. What we avoid: high pressure and narrow tips, which leave furry, gouged boards and lap marks. The cleaning solution does most of the work, followed by a gentle rinse.

Is exterior mold & mildew removal for pressure-treated wood safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule exterior mold & mildew removal for pressure-treated wood?

Clean yearly; restain every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Your Area

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Pressure Washing

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface.

Typical $150-$600

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Pool Deck Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote near you. Tell us what needs cleaning and we'll give you a price and the next available date.

Call (555) 010-0000Book a visit
Call NowFree Quote