Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all 50 states, DC & Puerto Rico
(555) 010-0000

Commercial Pressure Washing for Brick in Your Area

Low-pressure wash for brick. Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours. Typical cost $400-$2,000.

Call (555) 010-0000Instant quote

Commercial Pressure Washing for Brick is one of the jobs we do most often in your area. Typical jobs cost $400-$2,000, and you approve the price before we begin. On brick, the method we use is low-pressure wash.

How we clean it

Low-pressure washCleaning method
Usually 500-1,500 PSI with a wide fan tip, held well back from the mortarPressure

Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.

Caring for brick

Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.

Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.

How often: Every 2-3 years for most homes.

Signs you need commercial pressure washing for brick

  • Dirty entrances and walkways
  • Stained building walls and signs
  • Gum, grease and spills around doors
  • Customer or tenant complaints
  • Health or property manager inspections coming up

Why it gets dirty

  • Heavy foot traffic
  • Vehicle traffic and drips
  • Food and grease near restaurants
  • Pollution and weather

What you can do yourself

  • Sweep entrances daily
  • Clean up spills right away
  • Keep dumpster areas closed and clean

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Wash water reaching storm drains, which can violate local stormwater rules
  • Slips and liability during business hours
  • Damaging signs, windows and finishes

Our process for commercial pressure washing for brick

  1. Survey the property and plan around your hours
  2. Set up signs and control wash water
  3. Pre-treat stains, gum and grease
  4. Clean walls and flatwork with the right pressure
  5. Final walkthrough and maintenance schedule

Typical commercial pressure washing for brick prices

$400-$2,000Typical range for a typical small to mid-size commercial building
Half a day to several daysTypical time on site
Quarterly to yearly, depending on trafficRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for brick

Serving your area and nearby towns

We provide commercial pressure washing for brick across all 50 states, Washington, DC and Puerto Rico. Pick your state to see local details:

Commercial Pressure Washing for Brick: frequently asked questions

How much does commercial pressure washing for brick cost?

Commercial Pressure Washing for Brick typically costs $400-$2,000 for a typical small to mid-size commercial building, and usually takes Half a day to several days. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for commercial pressure washing for brick?

For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.

Is commercial pressure washing for brick safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule commercial pressure washing for brick?

Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Your Area

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Pressure Washing

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface.

Typical $150-$600

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Pool Deck Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $200-$500

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

Ready for a cleaner home or business?

Get a free pressure washing quote near you. Tell us what needs cleaning and we'll give you a price and the next available date.

Call (555) 010-0000Book a visit
Call NowFree Quote