Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all 50 states, DC & Puerto Rico
(555) 010-0000

Pool Deck Cleaning for Pavers in Your Area

Pressure wash with a surface cleaner for pavers. Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone. Typical cost $200-$500.

Call (555) 010-0000Instant quote

From the free quote to the final rinse, pool deck cleaning for pavers in your area follows a simple process: inspect, protect, clean, rinse and check. With pavers, the right approach is pressure wash with a surface cleaner.

The right method for the job

Pressure wash with a surface cleanerCleaning method
Usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possiblePressure

Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.

Cleaning pavers safely

Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.

Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.

How often: Clean every 1-2 years; reseal every 2-4 years.

Is it time for pool deck cleaning for pavers?

  • Slippery spots near the water
  • Black or green growth at the edges and in joints
  • Rust or leaf stains
  • Faded or dirty coating
  • Hard-water and chlorine residue

What causes the dirt and stains

  • Constant splashing and standing water
  • Sunscreen, body oils and pool chemicals
  • Leaves and pool toys left on the deck
  • Hard water drying on the surface

Easy upkeep between cleanings

  • Hose off the deck after heavy pool use
  • Remove leaves and toys before they stain
  • Keep chlorine and acid containers off the deck surface
  • Ask us before using any cleaner on a coated or stone deck

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Peeling or etching a coated 'cool deck' surface with high pressure
  • Chemicals and wash water getting into the pool
  • Pitting travertine with acid cleaners
  • Slips on wet, treated surfaces

How we handle pool deck cleaning for pavers

  1. Check the deck material and coating
  2. Protect the pool and nearby plants
  3. Pre-treat algae and stains with pool-safe methods
  4. Clean with pressure suited to the surface
  5. Rinse thoroughly away from the water

Many pool decks have a textured acrylic or 'cool deck' coating. These need lower pressure than bare concrete, and a deck that is peeling may need recoating rather than more cleaning.

Pool Deck Cleaning for Pavers cost in your area

$200-$500Typical range for a typical residential pool deck
1-3 hoursTypical time on site
Once or twice a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pavers

Pool Deck Cleaning for Pavers in your area

We provide pool deck cleaning for pavers across all 50 states, Washington, DC and Puerto Rico. Pick your state to see local details:

Pool Deck Cleaning for Pavers: frequently asked questions

How much does pool deck cleaning for pavers cost?

Pool Deck Cleaning for Pavers typically costs $200-$500 for a typical residential pool deck, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pool deck cleaning for pavers?

For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.

Is pool deck cleaning for pavers safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pool deck cleaning for pavers?

Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Your Area

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Pressure Washing

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface.

Typical $150-$600

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

Ready for a cleaner home or business?

Get a free pressure washing quote near you. Tell us what needs cleaning and we'll give you a price and the next available date.

Call (555) 010-0000Book a visit
Call NowFree Quote