Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all 50 states, DC & Puerto Rico
(555) 010-0000

Pressure Washing for Exposed Aggregate in Your Area

Moderate-pressure wash for exposed aggregate. High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface. Typical cost $150-$600.

Call (555) 010-0000Instant quote

Pressure Washing for Exposed Aggregate is one of the jobs we do most often in your area. Typical jobs cost $150-$600, and you approve the price before we begin. For exposed aggregate, that means moderate-pressure wash.

The right method for the job

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI with a surface cleanerPressure

Cleaning solution: A concrete pre-treatment and degreaser as needed.

Cleaning exposed aggregate safely

Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.

Avoid: High pressure at edges and cracks, which can pop out aggregate.

How often: Clean yearly; reseal every 2-3 years.

When to book pressure washing for exposed aggregate

  • Driveway or walkways look dark, gray or streaky
  • Green or black growth in shaded areas and along edges
  • Slippery surfaces after rain
  • Oil, rust or tire marks you can't scrub out
  • You're getting ready to sell, seal or paint

Why it gets dirty

  • Dirt and pollen that settle into the pores of concrete
  • Mold, mildew and algae in damp, shaded spots
  • Oil and fluid drips from vehicles
  • Rust from sprinklers, furniture and fertilizer
  • Tire marks and general foot traffic

Safe steps for homeowners

  • Sweep off leaves and loose debris so they don't stain
  • Blot fresh oil drips with cat litter or an absorbent right away
  • Point sprinklers away from walls and walkways to cut down on rust and hard-water stains
  • Rinse pollen off with a garden hose during heavy pollen season

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Etched lines and 'zebra stripes' from holding a narrow tip too close
  • Water forced into window frames, door sills and siding laps
  • Damaged plants and lawns from chemical runoff
  • Injuries: a zero-degree tip can cut skin, and wet surfaces are slippery

How we handle pressure washing for exposed aggregate

  1. Walk the property and note surfaces, stains and anything fragile
  2. Protect plants, outlets, lights and doors, and move small items
  3. Pre-treat organic growth and degrease oil spots
  4. Clean with the right pressure and a surface cleaner for even results
  5. Rinse, post-treat to slow regrowth, and walk the job with you

Typical pressure washing for exposed aggregate prices

$150-$600Typical range for a typical home's driveway, walkways and patio
1-4 hoursTypical time on site
Once a year for most homesRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for exposed aggregate

Local pressure washing for exposed aggregate for your area

We provide pressure washing for exposed aggregate across all 50 states, Washington, DC and Puerto Rico. Pick your state to see local details:

Pressure Washing for Exposed Aggregate: frequently asked questions

How much does pressure washing for exposed aggregate cost?

Pressure Washing for Exposed Aggregate typically costs $150-$600 for a typical home's driveway, walkways and patio, and usually takes 1-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pressure washing for exposed aggregate?

For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.

Is pressure washing for exposed aggregate safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pressure washing for exposed aggregate?

Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Your Area

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Pool Deck Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $200-$500

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

Ready for a cleaner home or business?

Get a free pressure washing quote near you. Tell us what needs cleaning and we'll give you a price and the next available date.

Call (555) 010-0000Book a visit
Call NowFree Quote